Show Ipv6 Pim Sparse-Mode Mroute - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE MROUTE

show ipv6 pim sparse-mode mroute

Overview This command displays the IPv6 multicast routing table, or the IPv6 multicast
routing table based on the specified IPv6 address or addresses.
Two group IPv6 addresses cannot be used simultaneously; two source IPv6
addresses cannot be used simultaneously.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 pim sparse-mode mroute
Syntax
[<group-IPv6-address>|<source-IPv6-address>]
show ipv6 pim sparse-mode mroute [<group-IPv6-address>
<source-IPv6-address>]
show ipv6 pim sparse-mode mroute [<source-IPv6-address>
<group-IPv6-address>]
Mode User Exec and Privileged Exec
Usage Note that when a feature license is enabled, the output for the
sparse-mode mroute
terminal display width limit. Use the
command to display detailed entries of the IPv6 multicast routing table.
awplus#
Examples
awplus#
awplus#
C613-50103-01 REV A
Parameter
<group-IPv6-
address>
<source-IPv6-
address>
command will only show 100 interfaces because of the
show ipv6 pim sparse-mode mroute
show ipv6 pim sparse-mode mroute 2001:db8::
show ipv6 pim sparse-mode mroute 2001:db8:: 2002:db8::
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Group IPv6 address, entered in the form X:X::X:X. Based on
the group and source IPv6 address, the output is the selected
route if present in the multicast route tree.
Source IPv6 address, entered in the form X:X::X:X. Based on
the source and group IPv6 address, the output is the selected
route if present in the multicast route tree.
show ipv6 pim sparse-mode mroute detail
"Getting Started
Guide.
show ipv6 pim
1308