Table of Contents
Advertisement
PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE
MODE MROUTE
show ip pim dense-mode mroute
Overview
This command displays the IP PIM-DM multicast routing table.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip pim dense-mode mroute
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Figure 32-4: Example output from the show ip pim dense-mode mroute
C613-50103-01 REV A
show ip pim dense-mode mroute
command
PIM-DM Multicast Routing Table
(192.168.10.52, 224.1.1.1)
Source directly connected on vlan3
State-Refresh Originator State: Originator
Upstream IF: vlan3, State: Forwarding
Downstream IF List:
vlan2, in 'olist':
Downstream State: NoInfo
Assert State: NoInfo
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1346
Advertisement
Table of Contents
