Access-List (Hardware Mac Numbered) - Allied Telesis x310-26FT Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- ( MAC
ACCESS LIST HARDWARE NUMBERED

access-list (hardware MAC numbered)

Overview This command creates an access-list for use with hardware classification, such as
QOS. The access-list will match on packets that have the specified source and
destination MAC addresses. The parameter any may be specified if an address
does not matter.
Optionally, the vlan parameter can be matched for tagged (802.1q) packets.
The no variant of this command removes the specified MAC hardware filter
access-list.
access-list <4000-4699>
Syntax
{copy-to-cpu|copy-to-mirror|deny|permit|send-to-cpu}
{<source-mac-address> <source-mac-mask>|any}
{<destination-mac-address> <destination-mac-mask>|any} 
[vlan <1-4094>]
no access-list <4000-4699>
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
)
Parameter
<4000-4699>
copy-to-cpu
copy-to-mirror
deny
permit
send-to-cpu
<source-mac-address>
<source-mac-mask
any
<destination-mac-
address>
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Hardware MAC access-list.
Specify packets to copy to the CPU.
Specify packets to copy to the mirror port.
Access-list rejects packets that match the source and
destination filtering.
Access-list permits packets that match the source and
destination filtering.
Specify packets to send to the CPU.
The source MAC address of the packets.
Enter this in the format <HHHH.HHHH.HHHH>
where each H is a hexadecimal number that represents
a 4 bit binary number.
The mask that will be applied to the source MAC
addresses.
Enter this in the format <HHHH.HHHH.HHHH>
where each H is a hexadecimal number that represents
a 4 bit binary number. For a mask, each value will be
either 0 or F. Where Hex FF = Ignore, and Hex 00 =
Match.
Any source MAC address.
The destination MAC address of the packets.
Enter this in the format <HHHH.HHHH.HHHH>
where each H is a hexadecimal number that represents
a 4 bit binary number.
1365