Ip Pim Cisco-Register-Checksum - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM CISCO REGISTER CHECKSUM

ip pim cisco-register-checksum

Overview Use this command to configure the option to calculate the Register checksum over
the whole packet. This command is used to inter-operate with older Cisco IOS
versions.
Use the no variant of this command to disable this option.
Syntax ip pim cisco-register-checksum
no ip pim cisco-register-checksum
Default This command is disabled by default. By default, Register Checksum is calculated
only over the header.
Mode Global Configuration
awplus#
Example
awplus(config)#
C613-50103-01 REV A
configure terminal
ip pim cisco-register-checksum
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1219