Show Ipv6 Pim Sparse-Mode Neighbor - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE NEIGHBOR

show ipv6 pim sparse-mode neighbor

Overview Use this command to show the PIM-SMv6 neighbor information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 pim sparse-mode neighbor [<interface>]
[<IPv6-address>] [detail]
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
Figure 31-9: Example output from the show ipv6 pim sparse-mode neighbor
awplus#show ipv6 pim sparse-mode neighbor
Neighbor Address
fe80::202:b3ff:fed4:69fe
fe80::20e:cff:fe01:facc
Figure 31-10: Example output from the show ipv6 pim sparse-mode neighbor
awplus#show ipv6 pim sparse-mode neighbor detail 
Nbr fe80::211:11ff:fe44:4cd8 (vlan1), DR
Expires in 64 seconds, uptime 00:00:53
Holdtime: 70 secs, T-bit: off, Lan delay: 1, Override interval: 3
DR priority: 100, Gen ID: 1080091886,
Secondary addresses:
3ffe:10:10:10:3::180
C613-50103-01 REV A
Parameter Description
<interface> Interface name (e.g. vlan2). Show neighbors on an interface.
<IPv6-address> Show neighbors with a particular address on an interface. The
IPv6 address entered in the form X:X::X:X.
detail
Show detailed information.
show ipv6 pim sparse-mode neighbor
show ipv6 pim sparse-mode neighbor vlan5 detail
command
Interface
interface detail command
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Uptime/Expires
vlan2 05:33:52/00:01:41 1 /
vlan3 05:33:53/00:01:26 1 / DR
"Getting Started
Guide.
DR
Pri/Mode
1312