Auth-Web Authentication - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH WEB AUTHENTICATION

auth-web authentication

Overview This command overrides the default Web-based authentication method on an
interface by allowing you to apply a user-defined named list.
Use the no variant of this command to remove the named list from the interface
and apply the default method.
Syntax auth-web authentication {default|<list-name>}
no auth-web authentication
Default The default method list is applied to an interface by default.
Mode Interface Mode
Example To apply the named list 'vlan10_auth' on the vlan10 interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To remove the named list from the vlan10 interface and set the authentication
method back to default, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related aaa authentication auth-web
Commands
C613-50103-01 REV A
Parameter Description
default Apply the default authentication method list
<list-name>
Apply the user-defined named list
configure terminal
interface vlan10
configure terminal
interface vlan10
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
auth-web authentication vlan10_auth
no auth-web authentication
1638