Table of Contents
Advertisement
OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
SHOW IPV
OSPF DATABASE ROUTER
show ipv6 ospf database router
Overview
Use this command in User Exec or Privileged Exec modes to display information
only about the router LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 ospf database router <adv-router-id>
[self-originate|adv-router <adv-router-id>]
Mode
User Exec and Privileged Exec
Examples
To display information about the OSPFv3 router LSAs, use the following command:
awplus#
Output
Figure 25-11: Example output from the show ipv6 ospf database router
C613-50103-01 REV A
Parameter
<adv-router-id>
self-originate
adv-router
show ipv6 ospf database router
command
OSPFv3 Router with ID (0.0.1.3) (Process P10)
Router-LSA (Area 0.0.0.0)
LS age: 556
LS Type: Router-LSA
Link State ID: 0.0.0.0
Advertising Router: 0.0.1.1
LS Seq Number: 0x800000CA
Checksum: 0xAA23
Length: 56
Flags: 0x02 (-|-|E|-)
Options: 0x000013 (-|R|-|-|E|V6)
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The router ID of the advertising router, in IPv4 address format.
Note, however, that this no longer represents a real address.
Self-originated link states.
The advertising router selected.
"Getting Started
Guide.
1039
Advertisement
Table of Contents
