Show Ip Pim Sparse-Mode Neighbor - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
-
SHOW IP PIM SPARSE MODE NEIGHBOR

show ip pim sparse-mode neighbor

Overview Use this command to show the PIM-SM neighbor information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip pim sparse-mode neighbor [<interface>] [<ip-address>]
[detail]
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
Figure 30-8: Example output from the show ip pim sparse-mode neighbor
Figure 30-9: Example output from the show ip pim sparse-mode neighbor
C613-50103-01 REV A
Parameter Description
<interface> Interface name (e.g. vlan2). Show neighbors on an interface.
<ip-address>
Show neighbors with a particular address on an interface. The IP
address entered in the form A.B.C.D.
detail
Show detailed information.
show ip pim sparse-mode neighbor
show ip pim sparse-mode neighbor vlan5 detail
command
Neighbor Interface
Address
Mode
10.10.0.9 vlan2
10.10.0.136 vlan2
10.10.0.172 vlan2
192.168.0.100 vlan3
interface detail command
Nbr 10.10.3.180 (vlan5), DR
Expires in 55 seconds, uptime 00:00:15
Holdtime: 70 secs, T-bit: off, Lan delay: 1, Override interval: 
3
DR priority: 100, Gen ID: 625159467,
Secondary addresses:
192.168.30.1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Uptime/Expires Ver
00:55:33/00:01:44 v2
00:55:20/00:01:25 v2
00:55:33/00:01:32 v2
00:55:30/00:01:20 v2
"Getting Started
Guide.
DR
Priority/
1 /
1 /
1 / DR
N / DR
1254