Ipv6 Multicast Route-Limit - Allied Telesis x310-26FT Command Reference Manual

M C
ULTICAST OMMANDS
6 -
IPV MULTICAST ROUTE LIMIT

ipv6 multicast route-limit

Overview Use this command to limit the number of multicast routes that can be added to an
IPv6 multicast routing table.
Use the no variant of this command to return the IPv6 route limit to the default.
Syntax ipv6 multicast route-limit <limit> [<threshold>]
no ipv6 multicast route-limit
Default The default limit and threshold value is 2147483647.
Mode Global Configuration
Usage This command limits the number of multicast IPv6 routes (mroutes) that can be
added to a router, and generates an error message when the limit is exceeded. If
the threshold parameter is set, a threshold warning message is generated when
this threshold is exceeded, and the message continues to occur until the number
of mroutes reaches the limit set by the limit argument.
awplus#
Examples
awplus(config)#
awplus#
awplus(config)#
C613-50103-01 REV A
Parameter Description
<limit> <1-2147483647> Number of routes.
<threshold> <1-2147483647> Threshold above which to generate a warning
message. The mroute warning threshold must not exceed the
mroute limit.
configure terminal
ipv6 multicast route-limit 34 24
configure terminal
no ipv6 multicast route-limit
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1197