Table of Contents
Advertisement
OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
SHOW DEBUGGING IPV
OSPF
show debugging ipv6 ospf
Overview
Use this command in User Exec or Privileged Exec modes to display which OSPFv3
debugging options are currently enabled.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging ipv6 ospf
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Figure 25-1: Example output from the show debugging ipv6 ospf command
C613-50103-01 REV A
show debugging ipv6 ospf
OSPFv3 debugging status:
OSPFv3 all packet detail debugging is on
OSPFv3 all IFSM debugging is on
OSPFv3 all NFSM debugging is on
OSPFv3 all LSA debugging is on
OSPFv3 all NSM debugging is on
OSPFv3 all route calculation debugging is on
OSPFv3 all event debugging is on
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1026
Advertisement
Table of Contents
