Recv-Buffer-Size (Rip) - Allied Telesis x310-26FT Command Reference Manual

RIP C
OMMANDS
- - (RIP)
RECV BUFFER SIZE

recv-buffer-size (RIP)

Overview Use this command to run-time configure the RIP UDP (User Datagram Protocol)
receive-buffer size to improve UDP reliability by avoiding UDP receive buffer
overrun.
Use the no variant of this command to reset the configured RIP UDP receive-buffer
size to the system default (196608 bits).
recv-buffer-size <8192-2147483647>
Syntax
no recv-buffer-size [<8192-2147483647>]
Default 196608 bits is the system default when reset using the no variant of this command.
Mode Router Configuration
Examples To run-time configure the RIP UDP, use the following commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
C613-50103-01 REV A
Parameter
<8192-2147483647> Specify the RIP UDP (User Datagram Protocol) buffer size
configure terminal
router rip
configure terminal
router rip
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
value in bits.
recv-buffer-size 23456789
no recv-buffer-size 23456789
818