Auth-Web-Server Ping-Poll Interval - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL INTERVAL

auth-web-server ping-poll interval

Overview This command is used to change the ping poll interval. The interval specifies the
time period between pings when the supplicant (client device) is reachable.
Use the no variant of this command to reset to the default period for ping polling
(30 seconds).
Syntax auth-web-server ping-poll interval <1-65535>
no auth-web-server ping-poll interval
Default The interval for ping polling is 30 seconds by default.
Mode Global Configuration
To set the interval of ping polling to 60 seconds, use the following commands:
Examples
awplus#
awplus(config)#
To set the interval of ping polling to the default (30 seconds), use the following
commands:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
C613-50103-01 REV A
Parameter
<1-65535>
configure terminal
auth-web-server ping-poll interval 60
configure terminal
no auth-web-server ping-poll interval
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Seconds.
1663