Accept-Lifetime - Allied Telesis x310-26FT Command Reference Manual

RIP C
OMMANDS
-
ACCEPT LIFETIME

accept-lifetime

Overview Use this command to specify the time period during which the authentication key
on a key chain is received as valid.
Use the no variant of this command to remove a specified time period for an
authentication key on a key chain as set previously with the accept-lifetime
command.
accept-lifetime <start-date> {<end-date>|
Syntax
duration <seconds>|infinite}
no accept-lifetime
Mode Keychain-key Configuration
The following examples show the setting of accept-lifetime for key1 on the key
Examples
chain named mychain.
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
2007 04:04:02 Oct 6 2008
C613-50103-01 REV A
Parameter Description
<start-date> Specifies the start time and date in the format: 
<hh:mm:ss> <day> <month> <year> or 
<hh:mm:ss> <month> <day> <year>, where:
<hh:mm:ss> The time of the day, in hours, minutes and seconds
<day>
<month>
<year>
Specifies the end time and date in the format: 
<end-date>
<hh:mm:ss> <day> <month> <year> or 
<hh:mm:ss> <month> <day> <year>, where:
<hh:mm:ss> The time of the day, in hours, minutes and seconds
<day>
<month>
<year>
<seconds> <1-2147483646> Duration of the key in seconds.
infinite
Never expires.
configure terminal
key chain mychain
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
<1-31> The day of the month
The month of the year (the first three letters of the
month, for example, Jan)
<1993-2035> The year
<1-31> The day of the month
The month of the year (the first three letters of the
month, for example, Jan)
<1993-2035> The year
key 1
accept-lifetime 03:03:01 Dec 3
783