(Access-List Standard Numbered Filter) - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

IP
4 S
A
C
V
OFTWARE
CCESS
ONTROL
(
-
ACCESS
LIST STANDARD NUMBERED FILTER

(access-list standard numbered filter)

Overview
This ACL filter adds a source IP address filter entry to a current standard numbered
access-list. If a sequence number is specified, the new filter entry is inserted at the
specified location. Otherwise, the new filter entry is added at the end of the
access-list.
The no variant of this command removes a source IP address filter entry from the
current standard numbered access-list. You can specify the source IP address filter
entry for removal by entering either its sequence number (e.g. no 10), or by
entering its source IP address filter profile without specifying its sequence number.
Note that the sequence number can be found by running the
Software ACLs)
[<sequence-number>] {deny|permit} {<source>|host
Syntax
<host-address>|any}
no {deny|permit} {<source>|host <host-address>|any}
no <sequence-number>
Mode
IPv4 Standard ACL Configuration
Default
Any traffic controlled by a software ACL that does not explicitly match a filter is
denied.
C613-50103-01 REV A
L
(ACL) C
IST
OMMANDS
)
command.
Parameter
<sequence-number>
deny
permit
<source>
host
<host-address>
any
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
<1-65535>
The sequence number for the filter entry of the
selected access control list.
Access-list rejects packets of the type specified.
Access-list allows packets of the type specified
The source address of the packets. You can specify
either a subnet or all sources. The following are the
valid formats for specifying the source:
<ip-addr>
Enter a reverse mask for the
<reverse-mask>
source address in dotted
decimal format. For example,
entering 192.168.1.1
0.0.0.255 is the same as
entering 192.168.1.1/24.
<ip-addr>
An IPv4 address in a.b.c.d
format.
A single source host.
Single source host address.
Matches any source IP address.
show access-list (IPv4
1419

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents