Ospfv3 For Ipv6 Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

25

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
OSPFv3 for IPv6. See the
more information and examples.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
OSPFv3 for IPv6
OSPFv3 Feature Overview and Configuration Guide
"abr-type" on page 969
"area authentication ipsec
"area default-cost (IPv6
"area encryption ipsec spi
"area range (IPv6 OSPF)" on page 976
"area stub (IPv6 OSPF)" on page 978
"area virtual-link (IPv6
"area virtual-link authentication ipsec
"area virtual-link encryption ipsec
"auto-cost reference bandwidth (IPv6
"bandwidth" on page 988
"clear ipv6 ospf process" on page 989
"debug ipv6 ospf events" on page 990
"debug ipv6 ospf ifsm" on page 991
"debug ipv6 ospf lsa" on page 992
"debug ipv6 ospf nfsm" on page 993
"debug ipv6 ospf packet" on page 994
"debug ipv6 ospf route" on page 995
"default-information originate" on page 996
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Commands
spi" on page 970
OSPF)" on page 972
esp" on page 973
OSPF)" on page 979
spi" on page 981
spi" on page 983
OSPF)" on page 986
for
966