Maximum-Access-List - Allied Telesis x310-26FT Command Reference Manual

IP 4 S A C
V OFTWARE CCESS ONTROL
- -
MAXIMUM ACCESS LIST

maximum-access-list

Overview Sets the maximum number of filters that can be added to any access-list. These are
access-lists within the ranges <1-199>, <1300-1999> and <2000-2699> and
named standard and extended access-lists.
The no variant of this command removes the limit on the number of filters that can
be added to a software access-list
maximum-access-list <1-4294967294>
Syntax
no maximum-access-list
Mode Global Configuration
To set the maximum number of software filters to 200:
Example
awplus#
awplus(config)#
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
Parameter
<1-4294967294>
configure terminal
maximum-access-list 200
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Filter range.
1427