Ip Pim Register-Rate-Limit - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM REGISTER RATE LIMIT

ip pim register-rate-limit

Overview Use this command to configure the rate of register packets sent by this DR, in units
of packets per second.
Use the no variant of this command to remove the limit.
Syntax ip pim register-rate-limit <1-65535>
no ip pim register-rate-limit
Mode Global Configuration
Example awplus#
awplus(config)#
C613-50103-01 REV A
Parameter Description
<1-65535>
Specifies the maximum number of packets that can be sent per
second.
configure terminal
ip pim register-rate-limit 3444
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1230