Ipv6 Mld Ssm-Map Enable - Allied Telesis x310-26FT Command Reference Manual

MLD MLD S C
AND NOOPING OMMANDS
6 -
IPV MLD SSM MAP ENABLE

ipv6 mld ssm-map enable

Overview Use this command to enable the Source Specific Multicast (SSM) mapping feature
on the device.
Use the no variant of this command to disable the SSM mapping feature on the
device.
Syntax ipv6 mld ssm-map enable
no ipv6 mld ssm-map enable
Mode Global Configuration
Usage This command enables the SSM mapping feature for group members in the
defined SSM range. Configure the group member and the SSM range using the
ipv6 mld ssm-map static
Example This example shows how to enable the MLD SSM mapping feature on the device.
awplus#
awplus(config)#
Related ipv6 mld ssm-map static
Commands
C613-50103-01 REV A
command.
configure terminal
ipv6 mld ssm-map enable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1165