Route-Map - Allied Telesis x310-26FT Command Reference Manual

R M C
OUTE AP OMMANDS
-
ROUTE MAP

route-map

Overview Use this command to configure a route map entry, and to specify whether the
device will process or discard matching routes.
The device uses a name to identify the route map, and a sequence number to
identify each entry in the route map.
The route-map command puts you into route-map configuration mode. In this
mode, you can use the following:
•
•
Use the no variant of this command to delete a route map or to delete an entry
from a route map.
Syntax route-map <mapname> {deny|permit} <seq>
no route-map <mapname>
no route-map <mapname> {deny|permit} <seq>
Mode Global Configuration
Usage Route maps allow you to control and modify routing information by filtering
routes and setting route attributes. You can apply route maps when the device:
•
•
When a routing protocol passes a route through a route map, it checks the entries
in order of their sequence numbers, starting with the lowest numbered entry.
If it finds a match on a route map with an action of permit, then it applies any set
clauses and accepts the route. Having found a match, the route is not compared
against any further entries of the route map.
If it finds a match on a route map with an action of deny, it will discard the
matching route.
C613-50103-01 REV A
one or more of the match commands to create match clauses. These specify
what routes match the entry.
one or more of the set commands to create set clauses. These change the
attributes of matching routes.
Parameter Description
<mapname>
A name to identify the route map.
deny
The route map causes a routing process to discard matching routes.
permit
The route map causes a routing process to use matching routes.
<seq>
<1-65535> The sequence number of the entry. You can use this
parameter to control the order of entries in this route map.
redistributes routes from one routing protocol into another
redistributes static routes into routing protocols
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1072