Show Ip Igmp Interface - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

IGMP
IGMP S
C
AND
NOOPING
OMMANDS

SHOW IP IGMP INTERFACE

show ip igmp interface
Overview
Use this command to display the state of IGMP, IGMP Proxy service, and IGMP
Snooping for a specified VLAN, or all VLANs. IGMP is shown as Active or Disabled in
the show output. You can also display the number of groups a switch port belongs
to.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip igmp interface [<interface>]
Syntax
Mode
User Exec and Privileged Exec
Output
The following output shows IGMP interface status for vlan2 with IGMP Snooping
enabled:
The following output shows IGMP interface status for vlan2 with IGMP Snooping
disabled:
C613-50103-01 REV A
Parameter
Description
<interface>
The name of the interface.
If you specify a switch port number, the output displays the number
of groups the port belongs to, and the port's group membership
limit, if a limit has been set (with the command
maximum-groups).
awplus#show ip igmp interface vlan2
Interface vlan2 (Index 202)
IGMP Disabled, Inactive, Version 3 (default)
IGMP interface has 0 group-record states
IGMP activity: 0 joins, 0 leaves
IGMP robustness variable is 2
IGMP last member query count is 2
IGMP query interval is 125 seconds
IGMP query holdtime is 500 milliseconds
IGMP querier timeout is 255 seconds
IGMP max query response time is 10 seconds
Last member query response interval is 1000 milliseconds
Group Membership interval is 260 seconds
Strict IGMPv3 ToS checking is disabled on this interface
Source Address checking is enabled
IGMP Snooping is globally enabled
IGMP Snooping query solicitation is globally disabled
Num. query-solicit packets: 57 sent, 0 recvd
IGMP Snooping is enabled on this interface
IGMP Snooping fast-leave is not enabled
IGMP Snooping querier is not enabled
IGMP Snooping report suppression is enabled
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
ip igmp
1130

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents