Debug Ipv6 Ospf Packet - Allied Telesis x310-26FT Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
DEBUG IPV OSPF PACKET

debug ipv6 ospf packet

Overview This command enables debugging options for IPv6 OSPF packets.
To enable all debugging options, specify debug ipv6 ospf packet with no
additional parameters.
The no and undebug variants of this command disable IPv6 OSPF packet
debugging. Use this command without parameters to disable all options.
debug ipv6 ospf packet [dd] [detail] [hello] [ls-ack]
Syntax
[ls-request] [ls-update] [recv] [send]
no debug ipv6 ospf packet [dd] [detail] [hello] [ls-ack]
[ls-request] [ls-update] [recv] [send]
Mode Privileged Exec and Global Configuration
Examples To enable debugging for hello packets, use the following command:
awplus#
Related terminal monitor
Commands
undebug ipv6 ospf packet
C613-50103-01 REV A
Parameter Description
dd
Specifies debugging for IPv6 OSPF database descriptions.
detail
Sets the debug option to detailed information.
hello
Specifies debugging for IPv6 OSPF hello packets.
ls-ack
Specifies debugging for IPv6 OSPF link state acknowledgments.
ls-request
Specifies debugging for IPv6 OSPF link state requests.
ls-update
Specifies debugging for IPv6 OSPF link state updates.
recv
Specifies the debug option set for received packets.
send
Specifies the debug option set for sent packets.
debug ipv6 ospf packet hello
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
994