Table of Contents
Advertisement
PIM-SM C
OMMANDS
-
SHOW IP PIM SPARSE
MODE INTERFACE DETAIL
show ip pim sparse-mode interface detail
Overview
Use this command to show detailed information on a PIM-SM interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip pim sparse-mode interface detail
Mode
User Exec and Privileged Exec
Output
Figure 30-3: Example output from the show ip pim sparse-mode interface
C613-50103-01 REV A
detail command
vlan3 (vif 3):
Address 192.168.1.149, DR 192.168.1.149
Hello period 30 seconds, Next Hello in 15 seconds
Triggered Hello period 5 seconds
Neighbors:
192.168.1.22
vlan2 (vif 0):
Address 10.10.11.149, DR 10.10.11.149
Hello period 30 seconds, Next Hello in 18 seconds
Triggered Hello period 5 seconds
Neighbors:
10.10.11.4
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1247
Advertisement
Table of Contents
