Ip Pim Rp-Register-Kat - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM RP REGISTER KAT

ip pim rp-register-kat

Overview Use this command to configure the Keep Alive Time (KAT) for (S,G) states at the RP
(Rendezvous Point) to monitor PIM-SM Register packets.
Use the no variant of this command to return the PIM-SM KAT timer to its default
value of 210 seconds.
Syntax ip pim rp-register-kat <1-65535>
no ip pim rp-register-kat
Mode Global Configuration
Default The default PIM-SM KAT timer value is 210 seconds.
awplus#
Examples
awplus(config)#
awplus#
awplus(config)#
Related ip pim rp-address
Commands
ip pim rp-candidate
C613-50103-01 REV A
Parameter Description
<1-65536>
Specify the KAT timer in seconds. The default value is 210 seconds.
configure terminal
ip pim rp-register-kat 3454
configure terminal
no ip pim rp-register-kat
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1237