Access-List Hardware (Named) - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

IP
4 H
A
C
V
ARDWARE
CCESS
ONTROL
-
(
ACCESS
LIST HARDWARE
NAMED

access-list hardware (named)

Overview
This command creates a named hardware access-list and puts you into IPv4
Hardware ACL Configuration mode, where you can add filters to the ACL. Once you
have configured the ACL, you can apply it to a switch port.
The no variant of this command removes the specified named hardware ACL.
Syntax
access-list hardware <hardware-access-list-name>
no access-list hardware <hardware-access-list-name>
Mode
Global Configuration
Default
Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage
Use this command to name a hardware ACL and enter the IPv4 Hardware ACL
Configuration mode. If the named hardware ACL does not exist, it will be created
after entry. If the named hardware ACL does exist, then you can enter IPv4
Hardware ACL Configuration mode for that existing ACL.
Entering this command with the hardware ACL name moves you to the
(config-ip- hw-acl) prompt for the IPv4 Hardware ACL Configuration mode
so you can enter ACL filters with sequence numbers. From this prompt, configure
the filters for the ACL. See the
complete examples of configured sequenced numbered ACLs.
NOTE
To create the hardware access-list named ACL-1 and enter the IPv4 Hardware ACL
Examples
Configuration mode to specify the ACL filter entry, use the commands:
awplus#
awplus(config)#
awplus(config-ip-hw-acl)#
To remove the hardware access-list named ACL-1, use the commands:
awplus#
awplus(config)#
C613-50103-01 REV A
L
(ACL) C
IST
OMMANDS
)
Parameter
<hardware-access-
list-name>
: Hardware ACLs will permit access unless explicitly denied by an ACL action.
configure terminal
access-list hardware ACL-1
configure terminal
no access-list hardware ACL-1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Specify the hardware ACL name to then define ACL filters
for in the subsequent IPv4 Hardware ACL Configuration
mode.
ACL Feature Overview and Configuration Guide
for
1368

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents