Table of Contents
Advertisement
R
M
C
OUTE
AP
OMMANDS
-
SHOW ROUTE
MAP
show route-map
Overview
Use this command to display information about one or all route maps.
show route-map <map-name>
Syntax
Mode
User Exec and Privileged Exec
To display information about the route-map named example-map, use the
Example
command:
awplus#
Output
Figure 26-1: Example output from the show route-map command
Related
route-map
Commands
C613-50103-01 REV A
Parameter
Description
<map-name>
A name to identify the route map.
show route-map example-map
route-map example-map, permit, sequence 1
Match clauses:
ip address prefix-list example-pref
Set clauses:
metric 100
route-map example-map, permit, sequence 200
Match clauses:
Set clauses:
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1079
Advertisement
Table of Contents
