Match Cos - Allied Telesis x310-26FT Command Reference Manual

Q S C
O OMMANDS

MATCH COS

match cos
Overview Use this command to define a COS to match against incoming packets.
Use the no variant of this command to remove CoS.
Syntax match cos <0-7>
no match cos
Mode Class Map Configuration
To set the class-map's CoS to 4, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-cmap)#
To remove CoS from a class-map, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50103-01 REV A
Parameter Description
<0-7>
Specify the CoS value.
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
match cos 4
no match cos
1493