Clear Ipv6 Mroute Pim Sparse-Mode - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6
CLEAR IPV MROUTE PIM SPARSE

clear ipv6 mroute pim sparse-mode

Overview Use this command to clear all multicast route table entries learned through
PIM-SMv6 for a specified multicast group address, and optionally a specified
multicast source address.
NOTE
the
dynamic IPv6 multicast routes can take over from previous static IPv6 multicast routes.
clear ipv6 mroute <Group-IPv6-add> pim sparse-mode
Syntax
clear ipv6 mroute <Group-IPv6-add> <Source-IPv6-add> pim
sparse-mode
Mode Privileged Exec
awplus#
Example
awplus#
C613-50103-01 REV A
-
MODE
: Static IPv6 multicast routes take priority over dynamic IPv6 multicast routes. Use
clear ipv6 mroute command to clear static IPv6 multicast routes and ensure
Parameter
<Group-IPv6-add>
<Source-IPv6-add>
clear ipv6 mroute 2001:db8:: pim sparse-mode
clear ipv6 mroute 2001:db8:: 2002:db8:: pim sparse-mode
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Specify a multicast group IPv6 address, entered in the form
X:X::X:X.
Specify a source group IPv6 address, entered in the form
X:X::X:X.
1263