Table of Contents
Advertisement
IGMP
IGMP S
C
AND
NOOPING
OMMANDS
-
IP IGMP SNOOPING REPORT
SUPPRESSION
ip igmp snooping report-suppression
Overview
Use this command to enable report suppression for IGMP versions 1 and 2. This
command applies to interfaces configured for IGMP Snooping.
Report suppression stops reports being sent to an upstream multicast router port
when there are already downstream ports for this group on this interface.
Use the no variant of this command to disable report suppression.
ip igmp snooping report-suppression
Syntax
no ip igmp snooping report-suppression
Default
Report suppression does not apply to IGMPv3, and is turned on by default for
IGMPv1 and IGMPv2 reports.
Mode
Interface Configuration for a VLAN interface.
Example
To enable report suppression for IGMPv2 reports for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Related
show ip igmp interface
Commands
show running-config
C613-50103-01 REV A
configure terminal
interface vlan2
ip igmp version 2
ip igmp snooping report-suppression
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1111
Advertisement
Table of Contents
