Debug Pim Dense-Mode Encode - Allied Telesis x310-26FT Command Reference Manual

PIM-DM C
OMMANDS
-
DEBUG PIM DENSE MODE ENCODE

debug pim dense-mode encode

Overview This command enables debugging of the PIM-DM message encoder.
The no variant of this command disables debugging of the PIM-DM message
encoder.
Syntax debug pim dense-mode encode
no debug pim dense-mode encode
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
Related debug pim dense-mode all
Commands
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif
C613-50103-01 REV A
configure terminal
debug pim dense-mode encoder
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1326