Radius Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

41

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the device to use RADIUS servers.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

RADIUS Commands

"auth radius send nas-identifier" on page 1745
"auth radius send service-type" on page 1746
"deadtime (RADIUS server
"debug radius" on page 1748
"ip radius source-interface" on page 1749
"radius-server deadtime" on page 1750
"radius-server host" on page 1751
"radius-server key" on page 1754
"radius-server retransmit" on page 1755
"radius-server timeout" on page 1757
"server (Server Group)" on page 1759
"show debugging radius" on page 1761
"show radius" on page 1762
"show radius statistics" on page 1765
"undebug radius" on page 1766
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
group)" on page 1747
1744