Table of Contents
Advertisement
RADIUS C
OMMANDS
DEBUG RADIUS
debug radius
Overview
This command enables RADIUS debugging. If no option is specified, all debugging
options are enabled.
Use the no variant of this command to disable RADIUS debugging. If no option is
specified, all debugging options are disabled.
Syntax
debug radius [packet|event|all]
no debug radius [packet|event|all]
Default
RADIUS debugging is disabled by default.
Mode
Privileged Exec
Examples
To enable debugging for RADIUS packets, use the command:
awplus#
To enable debugging for RADIUS events, use the command:
awplus#
To disable debugging for RADIUS packets, use the command:
awplus#
To disable debugging for RADIUS events, use the command:
awplus#
Related
show debugging radius
Commands
undebug radius
C613-50103-01 REV A
Parameter
Description
packet
Debugging for RADIUS packets is enabled or disabled.
event
Debugging for RADIUS events is enabled or disabled.
all
Enable or disable all debugging options.
debug radius packet
debug radius event
no debug radius packet
no debug radius event
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1748
Advertisement
Table of Contents
