Table of Contents
Advertisement
Q
S C
O
OMMANDS
-
SERVICE
POLICY INPUT
service-policy input
Overview
Use this command to apply a policy-map to the input of an interface.
Use the no variant of this command to remove a policy-map and interface
association.
Syntax
service-policy input <policy-map>
no service-policy input <policy-map>
Mode
Interface Configuration
Usage
This command can be applied to switch ports or static channel groups, but not to
dynamic (LACP) channel groups.
To apply a policy-map named pmap1 to interface port1.0.2, use the
Example
commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
Parameter
<policy-map>
configure terminal
interface port1.0.2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Policy map name that will be applied to the input.
service-policy input pmap1
1520
Advertisement
Table of Contents
