Auth Profile (Global Configuration) - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
(G C
AUTH PROFILE LOBAL ONFIGURATION

auth profile (Global Configuration)

Overview Use this command to enter port authentication profile mode and configure a port
authentication profile.
If the specified profile does not exist a new authentication profile is created with
the name provided.
Use the no variant of this command to delete the specified port authentication
profile.
auth profile <profile-name>
Syntax
no auth profile <profile-name>
Default No port authentication profiles are created by default.
Mode Global Configuration
Usage A port authentication profile is a configuration object that aggregates multiple
port authentication commands. These profiles are attached or detached from an
interface using the
Example To create a new authentication profile 'student', use the following commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To delete an authentication profile 'student', use the following commands:
awplus#
awplus(config)# no
Related auth profile (Interface Configuration)
Commands
description (Authentication Profile)
C613-50103-01 REV A
)
Parameter Description
<varname>
Name of the profile to create or configure.
auth profile (Interface Configuration)
configure terminal
auth profile student
configure terminal
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
auth profile student
command.
1604