Table of Contents
Advertisement
PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE
MODE NEXTHOP
show ip pim dense-mode nexthop
Overview
This command displays the next hop information as used by PIM-DM. In the
context of PIM-DM, the term ' next hop' refers to the next hop router on the path
back to the source address of a multicast stream.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip pim dense-mode nexthop
Syntax
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Figure 32-7: Example output from the show ip pim dense-mode neighbor
Destination
Nexthop
Num
192.168.10.52
1
Table 2: Parameters in the output of the show ip pim dense-mode neighbor
C613-50103-01 REV A
show ip pim dense-mode nexthop
nexthop command
Nexthop
Addr
0.0.0.0
nexthop command
Parameter
Destination
Nexthop Num
Nexthop Addr
Nexthop Interface
Metric
Preference
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Nexthop
Metric Pref
Interface
vlan2
3
Description
Destination address for which PIM-DM requires next hop
information.
Number of next hops to the destination. PIM can only use
one next hop.
Address of the current next hop gateway.
Name of the next hop interface.
Metric of the route towards the destination.
Preference of the route towards the destination.
"Getting Started
Guide.
1
1349
Advertisement
Table of Contents
