Accounting Login - Allied Telesis x310-26FT Command Reference Manual

AAA C
OMMANDS

ACCOUNTING LOGIN

accounting login
Overview This command applies a login accounting method list to console or VTY lines for
user login. When login accounting is enabled using this command, logging events
generate an accounting record to the accounting server.
The accounting method list must be configured first using this command. If an
accounting method list is specified that has not been created by this command
then accounting will be disabled on the specified lines.
The no variant of this command resets AAA Accounting applied to console or VTY
lines for local or remote login. default login accounting is applied after issuing the
no accounting login command. Accounting is disabled with default.
accounting login {default|<list-name>}
Syntax
no accounting login
Default By default login accounting is disabled in the default accounting server. No
accounting will be performed until accounting is enabled using this command.
Mode Line Configuration
To apply the accounting server USERS to all VTY lines, use the following
Examples
commands:
awplus#
awplus(config)#
awplus(config-line)#
Related aaa accounting commands
Commands
aaa accounting login
C613-50103-01 REV A
Parameter Description
default
Default accounting method list.
<list-name>
Named accounting method list.
configure terminal
line vty 0 32
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
accounting login USERS
1727