Max-Static-Routes - Allied Telesis x310-26FT Command Reference Manual

R C
OUTING OMMANDS
- -
MAX STATIC ROUTES

max-static-routes

Overview Use this command to set the maximum number of static routes, excluding FIB
(Forwarding Information Base) routes.
NOTE
Use the no variant of this command to set the maximum number of static routes
to the default of 1000 static routes.
max-static-routes <1-1000>
Syntax
no max-static-routes
Default The default number of static routes is the maximum number of static routes (1000).
Mode Global Configuration
Example To reset the maximum number of static routes to the default maximum, use the
command:
awplus#
awplus(config)#
NOTE
Base). Therefore, rejected static routes will not appear in the running config.
Related max-fib-routes
Commands
C613-50103-01 REV A
: For FIB routes use the
configure terminal
no max-static-routes
: Static routes are applied before adding routes to the RIB (Routing Information
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
max-fib-routes command.
770