Description (Authentication Profile) - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
(A
DESCRIPTION UTHENTICATION

description (Authentication Profile)

Overview Use this command to add a description to an authentication profile in
Authentication Profile mode.
Use the no variant of this command to remove the current description.
Syntax description <description>
Default No description configured by default.
Mode Authentication Profile
Example To add a description to the authentication profile 'student', use the following
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To remove a description from the authentication profile 'student', use the
following commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Related auth profile (Global Configuration)
Commands
C613-50103-01 REV A
P )
ROFILE
Parameter Description
<description>
Text describing the selected authentication profile.
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
description student room setting
no description
1674