Ip Multicast Wrong-Vif-Suppression - Allied Telesis x310-26FT Command Reference Manual

M C
ULTICAST OMMANDS
- -
IP MULTICAST WRONG VIF SUPPRESSION

ip multicast wrong-vif-suppression

Overview Use this command to prevent unwanted multicast packets received on an
unexpected VLAN being trapped to the CPU.
Use the no variant of this command to disable wrong VIF suppression.
Syntax ip ip multicast wrong-vif-suppression
no ip multicast wrong-vif-suppression
Default By default, this feature is disabled.
Mode Global Configuration
Usage Use this command if there is excessive CPU load and multicast traffic is enabled. To
confirm that VIF messages are being sent to the CPU use the
command.
Examples To enable the suppression of wrong VIF packets, use the following commands:
awplus#
awplus(config)#
To disable the suppression of wrong VIF packets, use the following commands:
awplus#
awplus(config)#
C613-50103-01 REV A
configure terminal
ip multicast wrong-vif-suppression
configure terminal
no ip multicast wrong-vif-suppression
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
debug nsm mcast6
1190