Mls Qos Cos - Allied Telesis x310-26FT Command Reference Manual

Q S C
O OMMANDS

MLS QOS COS

mls qos cos
Overview This command assigns a CoS (Class of Service) user-priority value to untagged
frames entering a specified interface. By default, all untagged frames are assigned
a CoS value of 0.
Use the no variant of this command to return the interface to the default CoS
setting for untagged frames entering the interface.
mls qos cos <0-7>
Syntax
no mls qos cos
By default, all untagged frames are assigned a CoS value of 0. Note that for tagged
Default
frames, the default behavior is not to alter the CoS value.
Mode Interface Configuration
Example To assign a CoS user priority value of 2 to all untagged packets entering ports 1.0.1
to 1.0.6, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
Parameter Description
<0-7>
The Class of Service, user-priority value.
configure terminal
interface port1.0.1-port1.0.6
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
mls qos cos 2
1504