Debug Ipv6 Pim Sparse-Mode Packet - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
DEBUG IPV PIM SPARSE MODE PACKET

debug ipv6 pim sparse-mode packet

Overview Use this command to activate PIM-SMv6 packet debugging.
Use the no variant of this command to deactivate PIMv6 packet debugging.
Syntax debug ipv6 pim sparse-mode packet {in|out}
no debug ipv6 pim sparse-mode packet {in|out}
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
Related show debugging ipv6 pim sparse-mode
commands
undebug all ipv6 pim sparse-mode
C613-50103-01 REV A
Parameter Description
packet
Activates debug printing of incoming and/or outgoing IPv6 packets.
in
Specify incoming packet debugging.
out
Specify outgoing packet debugging.
configure terminal
terminal monitor
debug ipv6 pim sparse-mode packet in
configure terminal
terminal monitor
debug ipv6 pim sparse-mode packet out
configure terminal
terminal monitor
no debug ipv6 pim sparse-mode packet in
configure terminal
terminal monitor
no debug ipv6 pim sparse-mode packet out
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1267