Auth-Web Method - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH WEB METHOD

auth-web method

Overview This command sets the Web-authentication access method that is used with
RADIUS on the interface specified.
The no variant of this command sets the authentication method to PAP for the
interface specified when Web-Authentication is also used with the RADIUS
authentication method.
auth-web method {eap-md5|pap}
Syntax
no auth-web method
Default The Web-Authentication method is set to PAP by default.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
To set the Web-Authentication method to eap-md5 on interface port1.0.2, use
Example
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the web authentication method to eap-md5 for authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To reset the web authentication method to the default (PAP) for authentication
profile 'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Related auth profile (Global Configuration)
Commands
show auth
show auth interface
show running-config
C613-50103-01 REV A
Parameter Description
eap-md5
Enable EAP-MD5 as the authentication method.
pap
Enable PAP as the authentication method.
configure terminal
interface port1.0.2
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
auth-web method eap-md5
auth-web method eap-md5
no auth-web method
1646