Clear Ipv6 Pim Sparse-Mode Bsr Rp-Set - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
CLEAR IPV PIM SPARSE MODE BSR RP

clear ipv6 pim sparse-mode bsr rp-set *

Overview Use this command to clear all Rendezvous Point (RP) sets learned through the
PIM-SMv6 Bootstrap Router (BSR).
NOTE
the
dynamic IPv6 multicast routes can take over from previous static IPv6 multicast routes.
clear ipv6 pim sparse-mode bsr rp-set *
Syntax
Mode Privileged Exec
Usage For multicast clients, note that one router will be automatically or statically
designated as the RP, and all routers must explicitly join through the RP. A
Designated Router (DR) sends periodic Join/Prune messages toward a
group-specific RP for each group that it has active members.
For multicast sources, note that the Designated Router (DR) unicasts Register
messages to the RP encapsulating the data packets from the multicast source. The
RP forwards decapsulated data packets toward group members.
awplus#
Example
C613-50103-01 REV A
- *
SET
: Static IPv6 multicast routes take priority over dynamic IPv6 multicast routes. Use
clear ipv6 mroute command to clear static IPv6 multicast routes and ensure
Parameter Description
*
Clears all RP sets.
clear ipv6 pim sparse-mode bsr rp-set *
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1264