Debug Ipv6 Ospf Events - Allied Telesis x310-26FT Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
DEBUG IPV OSPF EVENTS

debug ipv6 ospf events

Overview This command enables IPv6 OSPF debugging for event troubleshooting.
To enable all debugging options, specify debug ipv6 ospf event with no
additional parameters.
The no and undebug variants of this command disable OSPF debugging. Using
this command with no parameters entered, will disable debugging for all
parameter options.
debug ipv6 ospf events [abr] [asbr] [os][router] [vlink]
Syntax
no debug ipv6 ospf events [abr] [asbr] [os] [router] [vlink]
Mode Privileged Exec and Global Configuration
Example To enable IPv6 event debugging and show ABR events, use the following
command:
awplus#
C613-50103-01 REV A
Parameter Description
abr
Shows ABR events.
asbr
Shows ASBR events.
router
Shows other router events.
os
Shows OS events.
vlink
Shows virtual link events.
debug ipv6 ospf events asbr
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
990