Pim-Sm Commands; Introduction; Chapter 30: Pim-Sm Commands - Allied Telesis x310-26FT Command Reference Manual

30

Introduction

Overview This chapter provides an alphabetical reference of PIM-SM commands. For
commands common to PIM-SM and PIM-DM, see the
chapter.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

PIM-SM Commands

"clear ip pim sparse-mode bsr rp-set
"clear ip mroute pim sparse-mode" on page 1211
"debug pim sparse-mode" on page 1212
"debug pim sparse-mode
"ip pim accept-register
"ip pim anycast-rp" on page 1216
"ip pim bsr-border" on page 1217
"ip pim bsr-candidate" on page 1218
"ip pim cisco-register-checksum" on page 1219
"ip pim cisco-register-checksum
"ip pim crp-cisco-prefix" on page 1221
"ip pim dr-priority" on page 1222
"ip pim exclude-genid" on page 1223
"ip pim ext-srcs-directly-connected
"ip pim hello-holdtime
"ip pim hello-interval (PIM-SM)" on page 1226
"ip pim ignore-rp-set-priority" on page 1227
"ip pim jp-timer" on page 1228
"ip pim neighbor-filter
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
*" on page 1210
timer" on page 1213
list" on page 1215
group-list" on page 1220
(PIM-SM)" on page 1224
(PIM-SM)" on page 1225
(PIM-SM)" on page 1229
Multicast Commands
1208