Table of Contents
Advertisement
OSPF C
OMMANDS
SHOW IP OSPF DATABASE OPAQUE
show ip ospf database opaque-link
Overview
Use this command to display information about the link-state type 9 LSAs. This
type denotes a link-local scope. The LSAs are not flooded beyond the local
network.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip ospf database opaque-link [<ip-address>]
Syntax
[self-originate|<advrouter>]
Mode
User Exec and Privileged Exec
awplus#
Examples
self-originate
awplus#
awplus#
2.3.4.5
Output
Figure 24-12: Example output from the show ip ospf database opaque-link
C613-50103-01 REV A
-
LINK
Parameter
<advrouter>
adv-router
<ip-address>
self-originate
show ip ospf database opaque-link 1.2.3.4
show ip ospf database opaque-link self-originate
show ip ospf database opaque-link 1.2.3.4 adv-router
command
OSPF Router process 100 with ID (10.10.11.50)
Link-Local Opaque-LSA (Link hme0:10.10.10.50)
LS age: 276
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: Link-Local Opaque-LSA
Link State ID: 10.0.220.247 (Link-Local Opaque-Type/ID)
Opaque Type: 10
Opaque ID: 56567
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0x744e
Length: 26
Link-Local Opaque-LSA (Link hme1:10.10.11.50)
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
adv-router <ip-address>
Displays all the LSAs of the specified router.
A link state ID, as an IP address.
Displays self-originated link states.
"Getting Started
Guide.
945
Advertisement
Table of Contents
