Table of Contents
Advertisement
A
C
UTHENTICATION
OMMANDS
SHOW AUTH
show auth
Overview
This command shows the configuration state of authentication.
show auth [all]
Syntax
Mode
Privileged Exec
Example
To display all authentication information, enter the command:
awplus#
Output
Figure 39-1: Example output from the show auth command
awplus# show auth all
802.1X Port-Based Authentication Enabled
MAC-based Port Authentication Disabled
WEB-based Port Authentication Enabled
RADIUS server address (auth): 150.87.17.192:1812
Last radius message id: 4
Authentication Info for interface port1.0.1 portEnabled: true - portControl: Auto
portStatus: Authorized
reAuthenticate: disabled
reAuthPeriod: 3600
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in
KT: keyTxEnabled: false
critical: disabled
guestVlan: disabled
authFailVlan: disabled
dynamicVlanCreation: disabled
hostMode: single-host
dot1x: enabled
protocolVersion: 1
authMac: disabled
authWeb: enabled
method: PAP
maxAuthFail: 3
packetForwarding:
10.0.0.1 80/tcp
dns
dhcp
C613-50103-01 REV A
Parameter
Description
all
Display all authentication information for each authenticated
interface. This can be a static channel (or static aggregator), or a
dynamic (or LACP) channel group, or a switch port.
show auth all
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1679
Advertisement
Table of Contents
