Show Ipv6 Pim Sparse-Mode Mroute Detail - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE MROUTE DETAIL

show ipv6 pim sparse-mode mroute detail

Overview This command displays detailed entries of the IPv6 multicast routing table, or
detailed entries of the IPv6 multicast routing table based on the specified IPv6
address or addresses.
Two group IPv6 addresses cannot be used simultaneously; two IPv6 source
addresses cannot be used simultaneously.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 pim sparse-mode mroute
Syntax
[<group-IPv6-address>|<source-IPv6-address>] detail
show ipv6 pim sparse-mode mroute [<group-IPv6-address>
<source-IPv6-address>] detail
show ipv6 pim sparse-mode mroute [<source-IPv6-address>
<group-IPv6-address>] detail
Usage Based on the group and source IPv6 address, the output is the selected route if
present in the multicast route tree.
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
detail
Figure 31-8: Example output from the show ipv6 pim sparse-mode mroute
C613-50103-01 REV A
Parameter
<group-IPv6-address>
<source-IPv6-address> Source IPv6 address, entered in the form X:X::X:X.
detail
show ipv6 pim sparse-mode mroute detail
show ipv6 pim sparse-mode mroute 2001:db8:: detail
show ipv6 pim sparse-mode mroute 2001:db8:: 2002:db8::
detail command
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Group IPv6 address, entered in the form X:X::X:X.
Output is all multicast entries belonging to that group.
Output is all multicast entries belonging to that source.
Show detailed information.
"Getting Started
Guide.
1310