Class - Allied Telesis x310-26FT Command Reference Manual

Q S C
O OMMANDS

CLASS

class
Overview Use this command to associate an existing class-map to a policy or policy-map
(traffic classification), and to enter Policy Map Class Configuration mode to
configure the class- map.
Use the no variant of this command to delete an existing class-map.
If your class-map does not exist, you can create it by using the
command.
class {<name>|default}
Syntax
no class <name>
Mode Policy Map Configuration
The following example creates the policy-map pmap1(using the policy-map
Example
command), then associates this to an already existing class-map named cmap1,
use the commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
Related class-map
Commands
policy-map
C613-50103-01 REV A
Parameter Description
<name>
Name of the (already existing) class-map.
default
Specify the default class-map.
configure terminal
policy-map pmap1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
class cmap1
class-map
1485