Ip Igmp; No Ip Igmp - Allied Telesis x310-26FT Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS

IP IGMP

ip igmp
Overview Use this command to enable IGMP on an interface. The command configures the
device as an IGMP querier.
Use the no variant of this command to return all IGMP related configuration to the
default on this interface.
Syntax ip igmp

no ip igmp

Default Disabled
Mode Interface Configuration for a VLAN interface.
Usage An IP address must be assigned to the interface first, before this command will
work.
Example To specify an interface as an IGMP querier, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show ip igmp interface
Commands
show running-config
C613-50103-01 REV A
configure terminal
interface vlan2
ip igmp
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1087