Auth-Web-Server Page Logo - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER PAGE LOGO

auth-web-server page logo

Overview This command sets the type of logo that will be displayed on the web
authentication page.
Use the no variant of this command to set the logo type to auto.
Note that if you need to customize the login page extensively, you can instead
replace it with your own page. See "Customising the Login Page" in the
Port Authentication Feature Overview and Configuration
auth-web-server page logo {auto|default|hidden}
Syntax
no auth-web-server page logo
Default Logo type is auto by default.
Mode Global Configuration
Examples To display the default logo with ignoring installed custom logo, use the
commands:
awplus#
awplus(config)#
To set back to the default logo type auto, use the commands:
awplus#
awplus(config)#
Validation show auth-web-server page
Commands
C613-50103-01 REV A
Parameter
auto
default
hidden
configure terminal
auth-web-server page logo default
configure terminal
no auth-web-server page logo
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Display the custom logo if installed; otherwise display the
default logo
Display the default logo
Hide the logo
AAA and
Guide.
1656